Skip to content

Cart

Your cart is empty

Japanese Carving Chisel Set By Konobu - 62 Pieces

Sale price¥400,000 JPY

Smith name: Takiguchi Kiyo(Konobu Ⅱ) & Saito Kazuyoshi(Konobu Ⅲ)

Steel: Blue Steel #2

Blade width: 18,15,12,9,10mm

Chisel types; sizes; and blacksmiths (Photos 4–6):

1~2: Into(印刀) L/R Set; 12mm; Konobu Ⅱ.

2~4: Naginata(薙刀) L/R Set; 15mm; Konobu Ⅱ. 

5~6: Into(印刀) L/R Set; 15mm; Konobu Ⅱ. 

7: Maru(丸,Deep U), 18mm, Konobu Ⅱ. 

8: Maru(丸,Deep U), 24mm, Konobu Ⅱ. 

9: Hira (平,Flat), 24mm, Konobu Ⅱ. 

(Photos 7–9):

1: V-Parting Triangle; 4.5mm; Konobu Ⅱ.

2: V-Parting Triangle; 6mm; Konobu Ⅱ.

3: Hira (平,Flat), 9mm, Konobu Ⅱ. 

4: Maru(丸,Deep U), 6mm, Konobu Ⅱ. 

5: Maru(丸,Shallow U), 7.5mm, Konobu Ⅱ. 

6: Maru(丸,Deep U), 12mm, Konobu Ⅱ. 

7:  Maru(丸,Shallow U), 15mm, Konobu Ⅱ.

(Photos 10–12):

1: Hako-nomi; 9mm; Konobu Ⅲ.

2: Heriagari-nomi; 9mm; Konobu Ⅲ.

3: Hira maru (Flat Round), 12mm, Konobu Ⅱ. 

4: Maru(丸,Deep U), 3mm, Konobu Ⅱ. 

5: Maru(丸,Shallow U), 9mm, Konobu Ⅱ. 

6: Maru(丸,Shallow U), 15mm, Konobu Ⅱ. 

7:  Maru(丸,Deep U), 9mm, Konobu Ⅱ.

8: Maru(丸, U), 18mm, Konobu Ⅱ.

(Photos 13–15):

1: Maru(丸,Shallow U), 9mm, Konobu Ⅱ.

2~5: Maru(丸, U), 9/9/7.5/6mm, Konobu Ⅱ.

6~13: Maru(丸, Deep U), 1.5/3/4.5/3/6/7/7.5/18mm, Konobu Ⅱ.

(Photos 16–18):

1: V-Parting Triangle; 3mm; Konobu Ⅱ.

2~4: Hira maru (Flat Round), 9/12/21mm, Konobu Ⅱ.

5~6: Hira (Flat), 3/3mm, Konobu Ⅱ.

7: Hira (Flat), 3/3mm, Konobu Ⅲ. 

8: Hira Sukui(Spoon Flat), 1.5mm, Konobu Ⅱ.

9~10: Into(印刀) R; 3/4.5mm; Konobu Ⅱ.

11: Naginata(薙刀) L; 6mm; Konobu Ⅱ. 

12: Naginata(薙刀) R; 9mm; Konobu Ⅱ.

13: Into(印刀) R; 15mm; Konobu Ⅱ.

(Photos 19–21):

1: Hira maru (Flat Round), 1.5mm, Konobu Ⅱ.

2~3: Naginata(薙刀) L/R Set; 3mm; Konobu Ⅱ. 

4: Naginata(薙刀) L; 5mm; Konobu Ⅱ.

5: Naginata(薙刀) R; 6mm; Konobu Ⅱ.

6~7: Naginata(薙刀)  L/R Set; 7.5mm; Konobu Ⅱ.

8~12: Naginata(薙刀) R; 8/9/10.5/12/12mm; Konobu Ⅱ.

Accessories:Original wooden box (fits a portion of the chisels only)

Additional Information:  These chisels come from the collection of a retired carpenter in the Tokyo area. Most of them were crafted by Konobu II (二代小信), with a few pieces by Konobu III (三代小信). For now, I’m offering them only as a complete set.

Except for the group shown in the last three photos—which saw more frequent use—most of the rest are either unused or have only been used a handful of times. If there are no buyers for the full set after a while, I’ll break them down into smaller sets, though the prices per set will be higher then.

Only 1 unit left
Japanese Carving Chisel Set By Konobu -  62 Pieces
Japanese Carving Chisel Set By Konobu - 62 Pieces Sale price¥400,000 JPY